Archive | Bike Polo RSS feed for this section

RatsKL tee

9 Aug

The very first RatsKL tee!!!!

It’s slim fit, nicely fit Asian bodies, RM45 only, S,M,L,XL, limited prints, hurry hurry, contact Aby Hurairah 0176831974

Let’s Make Polo Mallet

23 Mar

Here’s a another tips in case y’all would like to copy & print….

Things You’ll Need:

  • Measuring tape
  • Ski poles, golf clubs or broomstick
  • Handsaw
  • Thick plastic ABS pipe (not PVC pipe)
  • Drill and drill bits
  • Long bolt (longer than the diameter of the ABS pipe) and nut
  • Hockey or electrical tape

And here’s how you get your hands dirty ….

  1. Step 1

    Measure the broomstick, ski pole or golf club to the correct length for your height, usually about 2 1/2 to 3 1/2 feet long. Cut off the end of the pole with the saw.

  2. Step 2

    Measure out and cut about a 6-inch long piece of plastic pipe. This will be the head of your mallet. You can get ABS pipe at most hardware stores, or see the Resources section.

  3. Step 3

    Attach a drill bit the same size as the diameter of the pole you created in Step 1.

  4. Step 4

    Figure 1

    //

    Figure 1

    Drill a hole into one side of your plastic pipe piece, and insert the pole into the pipe. Make sure not to make the hole too large, or the pole will slide around. You want it to be tight. See Figure 1.

  5. Step 5

    Change your drill bit to the diameter of your long bolt.

  6. Step 6

    Figure 2

    //

    Figure 2

    Place your drill and bit on the mallet head at a 90-degree angle from the pole. Drill a hole all the way through the mallet head, the pole and the opposite side of the mallet head. You may need to remove the pole to drill a hole through it. See Figure 2.

  7. Step 7

    Push the bolt through the two sides of the mallet head and the pole, and screw the nut onto it to secure it. Tighten the nut as much as possible so that it won’t wobble. Use the saw to saw off any part of the bolt end that is sticking out.

  8. Step 8

    Cover the top end of the pole if it is hollow with a penny or a plastic bottle cap. This will ensure that you don’t hurt your hands while playing. Wrap the end of the handle with hockey or electrical tape to make a grip

Bike Polo Rules

22 Mar

If you interested on how to play this . . . . . play it by the rules lads

Bike Polo Stick

22 Mar